Case C: OPM result 4
These results were submitted by OPM. For more information about OPM and how the simulations were performed, see the OPM group page.
Overview animation
Plot CO₂ liquid mass fractions in 3D
A 3D plot of the CO2 mass fraction in the liquid phase is shown below. The cells in the reporting mesh have their transparency adjusted depending on the mass fraction of CO₂ in the liquid phase, with cells that have no CO₂ being completely transparent. This gives a good indication of the spatial distribution of CO₂.
30 years: 5 years after start of second injector
50 years: End of injection
100 years
End of migration
Plot the cross sections used for plotting
In the remainder of the plots, we will show cross sections of the model. The cross sections used for plotting are shown below. These cut the middle of the model in x and y directions. The red cross section corresponds to the plane where x = 4200m, and the blue cross section corresponds to the plane where y = 2500m.
CO₂ mass fraction in liquid
The mass fraction of CO₂ in the liquid phase is shown below.
30 years: 5 years after start of second injector
50 years: End of injection
100 years
End of migration
Gas saturation
The free gas volume fraction in the porous medium.
30 years:
End of injection
100 years:
End of migration
Water density
The water density depends on the pressure, temperature and the amount of CO₂ that has been dissolved in the water phase
30 years:
End of injection
100 years:
End of migration
Thermodynamic state variables
Total mass of CO₂
The total mass of CO₂ in kilograms per cell is shown below. This is the absolute mass of CO₂ and indicates where the CO₂ is located in the domain.
30 years
50 years: End of injection
100 years
1000 years: End of migration
Pressure
The reported pressure in Pascal is shown below. This is the pressure of the water phase.
30 years
50 years: End of injection
100 years
1000 years: End of migration
Temperature
The reported temperature in degrees Celsius is shown below.
30 years:
50 years: End of injection
100 years:
1000 years: End of migration
H₂O mass fraction in vapor
A small amount of H₂O can vaporize into the gas phase. The mass fraction of H₂O in the gas phase is shown below.
30 years:
End of injection
100 years:
End of migration
Gas density
The gas density depends only on pressure and temperature in this model.
30 years:
End of injection
100 years:
End of migration
